
AudioBoost bởi NPlusOne
Increase the volume of audio on a tab, making quiet sounds louder and limiting loud sounds.
418 Users418 Users
Bạn sẽ cần Firefox để sử dụng tiện ích mở rộng này
Siêu dữ liệu mở rộng
Ảnh chụp màn hình

Về tiện ích mở rộng này
A Web Extension that inserts a Web Audio API GainNode and DynamicsCompressor node to increase the audio level of videos that are too quiet, while limiting the maximum volume of those videos.
This is an enhanced version of https://github.com/padenot/up-to-eleven: the input gain for the gain section, and the threshold and ratio for the compressor are now controlled by sliders in a pop up window.
Features
There is an enable/disable button in the pop up window that allows you to turn the extension on and off.
There is a VU meter to see the audio levels.
The Gain controls amount of gain applied before the compressor You can set this to 1 and there will be no additional gain, only compression.
The Threshold determines the volume levels above which the compressor will affect. All the way to the right and the compressor will do nothing. All the way to the left and the compressor will force all audio to the same volume(or try to). Somewhere about -20 is a good place to start.
Ratio is how much the compressor "compresses" the audio. To make everything the same volume, increase the ratio above 10. For a subtle effect, set the ratio to a low setting like 2 or 3.
This is an enhanced version of https://github.com/padenot/up-to-eleven: the input gain for the gain section, and the threshold and ratio for the compressor are now controlled by sliders in a pop up window.
Features
There is an enable/disable button in the pop up window that allows you to turn the extension on and off.
There is a VU meter to see the audio levels.
The Gain controls amount of gain applied before the compressor You can set this to 1 and there will be no additional gain, only compression.
The Threshold determines the volume levels above which the compressor will affect. All the way to the right and the compressor will do nothing. All the way to the left and the compressor will force all audio to the same volume(or try to). Somewhere about -20 is a good place to start.
Ratio is how much the compressor "compresses" the audio. To make everything the same volume, increase the ratio above 10. For a subtle effect, set the ratio to a low setting like 2 or 3.
Được xếp hạng 3,6 (bởi 1 người dùng)
Quyền hạn và dữ liệuTìm hiểu thêm
Quyền hạn bắt buộc:
- Truy cập dữ liệu của bạn trên mọi trang web
Thêm thông tin
- Liên kết tiện ích
- Phiên bản
- 0.4
- Kích cỡ
- 114,87 KB
- Cập nhật gần nhất
- 2 tháng trước (25 Thg 06 2025)
- Thể loại có liên quan
- Giấy phép
- Giấy phép MIT
- Lịch sử các phiên bản
- Thêm vào bộ sưu tập
Ghi chú phát hành cho phiên bản 0.4
Hopefully fixed VU meters breaking.
Tiện ích mở rộng khác của NPlusOne
- Chưa có xếp hạng nào
- Chưa có xếp hạng nào
- Chưa có xếp hạng nào
- Chưa có xếp hạng nào
- Chưa có xếp hạng nào
- Chưa có xếp hạng nào