Fantastic tool for synology users! This is one of the most useful addons for firefox i have. 5/5 stars!

Another hobby project: The developer has run out of steam (2022), bugs are no longer being fixed but nobody deletes the garbage from the repository.

To Firefox users

If you have a problem to connect magnet link on your synology Download station through this Add-on,

To make Bat file of magnet link for your own address,

1. search box of Window start button - CMD

2. write this [ ]
[copy con (file name).bat] -Enter

[start https://AAA.BBB.CCC.DDD:PORT/webman/3rdparty/syno-magnet/index.html#download=%s] - Enter

3. ctrl-z

p.s: https://AAA.BBB.CCC.DDD:PORT is your synology address. ex)https://192.123.456.789:1234

excute this .Bat file and click the take risk page and then you can connect magnet link.

시놀로지 주소나 포트 바꾼 뒤 파폭이나 크롬에서 이 애드온이 동작 안한다면, Bat 실행파일을 웹주소로 만든 뒤 브라우저 설정-애플리케이션-마그넷-동작을 변경해 주면 됩니다.

Bat 실행파일 작성 방법은 CMD 실행 후 위의 1~3대로 하시면 됩니다.
CMD 입력 할 시 [ ] 대괄호는 빼세요.

시작-검색창에 cmd 넣으시고 나오는거 실행

copy con 원하는파일이름.bat 엔터

start http://https://주소:포트/webman/3rdparty/syno-magnet/index.html#download=%s 엔터

ctrl-z
로 창 닫기 하면 됩니다.

포트 바꾼 뒤 몇 달 동안 골머리 앓다가 해결해서 리뷰 남깁니다.

Works fantastic. Do not forget to access your Synology once in your browser via https://ip-of-your-NAS

因為firefox addon必須使用https連線, 設定addon時如果遇到測試無法通過,請以瀏覽器打開連結 選擇接受風險並繼續,再次測試就會通過了,感謝作者開發了這個方便的附加工具.

Because the firefox addon must use https to connect, if the test fails to pass when setting the addon, please open the link with a browser, choose to accept the risk and continue, the test will pass again, thank the author for developing this convenient add-on tool.

magnet link does'nt work since 0.12.0 ...
waiting a debug

Works great, at least up to DSM 6.2.4, and saves me a lot of clicking. Except:

It often loses the settings for my NAS, causing me to end up clicking lots of things to download, only to have them not be sent to the NAS (I also rarely see the 'failed to connect' pop up error that I should in that case).

Every time, I have to go to the extension's options and reenter *all* the connection settings and options, as if it's a clean install.

This isn't every day or reboot or anything like that (where I might realise the cause), but happens randomly perhaps roughly once a week or two.

I'm not doing anything myself to cause this; I don't even allow FF to auto-update itself although I do keep extensions on automatic. Perhaps it's when this gets an update?

Anyway, other than that annoyance, it's a great utility.

Funciona muy bien siempre y cuando no añadas la verificación en dos pasos

great add-on, very good job in making it well integrated. Lately i just got some challenges with the 2FA option which does not make it compatible anymore. Hence, I have disabled the 2FA for users via the NAS admin interface but kept it on for admin, however the error message still appears even after removing the add-on and reboot...

Cet extension est particulièrement réussie ! :)

Great module but unfortunately it stopped working since version 0.10.0 on a DS110J with DSM 5.2-5967 Update 9 (and Firefox 88.0 on Ubuntu 20.04.2 LTS) => connection on the 110J is ok but adding an url to download fails.
Version 0.9.3 is working like a charm.

0.10.1 show No permission
0.9.3 OK